HOME >Kiln Equipment

Kiln Equipment

 LY Series Induced Draft Fan

Technical Parameters

Model Wind
(m³/h)
Motive Power
(kw)
Turning Speed
(r/min)
Y4-73-No10 38000 Y6-11 900
Y4-73-No12 54000 Y6-22 730
Y4-73-No14 65000 Y6-30 730
Y4-73-No16 76000 Y6-45 660
Y4-73-No18 85000 Y6-75 550

 Hydraulic Pusher

Adapt hydraulic double cylinder, push kiln car to drying room or buring room.

Model Motive Power(kw) Maximum
Pushing Force (T)
Maximum Travel (mm) Diameters of
 The Cylinder (mm)
Diameters of
The Piston (mm)
YDC-60 Y4-30 60 1650 Φ200 Φ100
YDC-50 Y4-22 50 1650 Φ200 Φ100
YDC-30 Y4-15 30 1650 Φ125 Φ70
 

 YD Shydraulic Pusher

Item YDS30 YDS35 YDS50 YDS60 YDS90
Maximum
Pushing Force(t)
30 35 50 60 90
Push speed
(m/s)
0.04 0.04 0.04 0 .04 0.04
Motive power
(kw)
15 18.5 22 30 45
Hydro-cylinder
(kw)
Φ140/Φ160 Φ150/Φ194 Φ180/Φ219 Φ200/Φ245 Φ200/Φ245


 Drawing Machine

Item  LYS-25 LYS-40 LYS-50
Pull force(t) 3 4 5
Pull speed(m/s) 0.1 0.1 0.1
Motive power(kw) 2.2 3 4
Drive ratio 1:121 1:121 1:121


 Hauling Machine

Technical Parameters

Item   TL-3 TL-4 TL-5.5 TL-7.5
Max tractive effort (t) 3.0 4.0 4.5 5.0
Pulling speed(m/s) 0.1-0.36 0.1-0.3 0.1-0.3 0.1-0.3
Motive power(kw) 3 4 5.5 7.5
Wire rope Φ10.6×(19)       Φ14.6×(19)
Track 12#U-steel outer edge of track width 920±1mm


 Hydraulic Stepping Machine

Technical Parameters

Item  YBS15 YBS20 YBS30 YBS50 YBS50
Max pulling force (t) 15 20 30 50 60
Push speed (m/s) 0.04 0.04 0.04 0.04 0.04
Motie power (kw) 11 15 15 22 30
Hydro-cylinder (kw) Φ140/Φ168 Φ140/Φ168 Φ140/Φ168 Φ180/Φ219 Φ200/Φ245


 Electric Kiln Car

1. Loading 208pcs
2. Continuous working 12-16hours
3. Charging period 8-10hours
4. Power consumption 3-5kw.h

 

 Electric Four Wheel Hydraulic Adobe Transportation Vehicle

1. Size (mm) 4500*1000*2000,
2. Operating platform height :800mm
3. Motor: (60V-72V)*(1300W-1500W)
4.  Front wheel 5.5-16 Malleable steel wheel,back wheel 400-14
5. Able to working 10-12hours with sufficient power, carry 12boards each time

 

 Automatic Transportation Vehicle

1. Feature size : 4200×1000×1200mm
2. Motor: 60V-72V  front wheel 400-12 tyre  back wheel 500-14 tyre
3. Working with automatic loading adobe cutter, save at least 4 worker, carry 10-12boards each time, able to continuous working 10-12hours with sufficient power


 

 Electric Kiln Car

1. Feature size : 2350×850×1150-2500×900×1150mm
2. Motor: (48V-60V)×(800W-1300W) front wheel 400-12 ,back wheel 450-12,chain transmission
3. Able to working 10-12hours with sufficient power, take 300-500pcs brick each time
4. Operating platform area: 1350*750*650mm(L*W*H)
5. Seat height: 650mm.

 
 DBC Ferry Pusher 

Model  Pushing force
(T) 
Distance of run
(mm) 
Ferry car speed
(M/min) 
Motive power
(kw) 
DBC15 15 1886 6.4 Y100L
2-4-3
    Your Contact Details To Us    
(*)Required information